Close

World's first LoRaWAN certification

The purpose of  LoRaWAN certification is to ensure that a product complies with the LoRaWAN specifications and is compatible with LoRaWAN networks and other LoRaWAN products. Only through the certification can a manufacturer be sure that their product functions correctly without interfering with others.

The world’s first LoRaWAN certification testing was done in Etteplan’s laboratory in Jyväskylä, Finland.

The industrial Internet is growing and spreading quickly. Where there is a need to collect data from an Internet-of-Things (IoT) network consisting of a large number of devices or to control devices in a large area, a long-range wide area network (LPWAN) is a powerful data transfer solution.

Modulation technology of LoRa provides a clearly longer range than competing technologies.

LoRa’s advantages consist of its excellent range, low power consumption, good data security, and good ability to penetrate obstacles. In addition, it is completely bidirectional, enabling remote control applications.

Battery powered LoRaWAN sensors can remain operational for up to 10 years.

Purpose of LoRa certification

The purpose of certification is to ensure that a product complies with the LoRaWAN specifications and is compatible with LoRaWAN networks. Therefore it is extremely important for manufacturers to receive LoRaWAN certification for their products. Only then can LoRa network operators be sure that a product functions correctly in their networks, without interfering with others.

Testing is done by means of the test mode of the LoRaWAN specifications. It checks the different functions such as channel selection, encryption, the adaptive data rate feature, etc.

The test reports of certified products are published on the website of the LoRa Alliance.

A turnkey service

Etteplan (formerly Espotel) was one of the first members of the LoRa Alliance. The LoRa Alliance approved Etteplan’s LoRa certification testing as the first in the world. We can apply for the required official approval and carry out LoRaWAN compatibility tests.

We can also deliver the approved test results to the LoRa Alliance, which then grants the LoRaWAN-certified status to the product, which again gives the right to use the LoRaWAN Certified logo with the product.

In addition to the LoRaWAN certification, assistance can be provided in meeting other national and international regulations.

All of the LoRa testing takes place in Etteplan's Test Laboratory in Jyväskylä, Finland.

The world's first LoRaWAN certified product was the RN2483 LoRa module from Microchip. See microchips press release here: Link to press release.

Importance of radio performance

Radio performance measurements ensure the devices’ reception is good even where coverage is weak. There are typically two extremes in radio device testing: the minimum requirements of the technology and the upper limits set by regulations.

Products have to exceed the technology’s minimum requirements to perform correctly in all situations and live up to the promises given. For a lower power technology like LoRa, good radio performance is essential for many reasons. On the other hand, the authorities check that the prescribed upper limits are not surpassed, for example by maximum transmission power. So devices have to be powerful enough, but not too powerful.

More Information

See all LoRaWAN approved products here: https://www.lora-alliance.org/certified-products.

For further information on LoRaWAN certification, please go to https://www.lora-alliance.org/certification-overview.

Related content

Analytics is a Process

Most industrial plants are already highly automated. Programmable controllers, sensors, computers have been common for decades and robots assemble products. But operative leaders naturally need to look ahead. We have automated our processes but what will the next step be? How to make our production line even more efficient? Could the data we collect be the answer?

Neste

Eatech (Part of Etteplan Group) implemented a mobile app for Neste that includes mobile refuelling, as well as a wide range of opportunities for customer marketing. Potential users of the application, which was released for iPhone and Android, are all the Finns traveling by car.

Posti

Eatech (Part of Etteplan Group) is Posti’s collaboration partner in charge of the maintenance of Posti’s parcel lockers. Eatech also participates in the development of the parcel locker system. The Continuous Services unit of Eatech carried out the modernisation of Posti’s parcel locker equipment and the implementation of the new software during autumn 2017. The work covered all parcel lockers in Finland.

Security - You’re blindfolded unless you scan for vulnerabilities

“This is a report from a customer project. Here we found several vulnerabilities when scanning a Linux-based device designed for industrial environments.”

Harri Susi, SW Testing & Cyber Security Specialist at Etteplan, is showing us a document that contains a detailed analysis of services provided by an IoT device and how hackers may be able to exploit it. A report like this is the first step towards more secure devices.

Contact us
Test Laboratory contact
Test Laboratory contact
Ismo Kaastinen
Ismo Kaastinen
Laboratory Manager