Skip to content

Advanced machines for fiber routing and coating

Demand for high-density optical fiber flex circuits is rising, and so is the variety of products built with them. Etteplan's fiber routing and coating machines combine fiber routing, coating, and CAD-based design software in one system, so you can design, route, coat, and scale production in a single production cycle.

Manual fiber production can't keep up with rising demand

Manual fiber routing is slow to adapt to new designs, hard to scale as volumes grow, and prone to inconsistent quality between batches. If you manufacture optical fiber flex circuits, or you supply telecom and industrial systems that depend on them, that gap shows up directly in missed capacity and variable output.

What you get with Etteplan's fiber routing and coating machine

  • High positioning accuracy

    Handles complex fiber layouts with routing accuracy of ±10 µm, fiber to fiber.

  • Consistent, fully automated quality

    Automated routing and coating removes the variation manual assembly introduces, run after run.

  • Fast changeover, flexible operation

    Switch between product designs quickly, without reconfiguring the line.

  • Built for R&D, prototyping, and production

    The same machine takes you from early circuit development through to full production volumes.

Unable to display the content

The cookies you have selected prevent this content from being displayed. To view content, you must accept marketing cookies.

Produce optical fiber circuits in three steps

Design

Create and adjust your circuit design in the machine's CAD-based software, including multi-layer and multi-colour layouts.

Route

The machine routes fibers with high positioning accuracy, including cross-wiring, in a compact footprint.

Coat

Routed fibers are coated to secure and protect them on the substrate, with UV or moisture curing depending on the application.

Technical specifications

  • Maximum product size: 1250 x 875 mm
  • Fiber compatibility: OM3 and OM4, 250 µm diameter, single-mode or multi-mode
  • Fiber routing radius: ≥ 10 mm
  • Routing accuracy, fiber to fiber: ± 10 µm
  • Multi-layer and multi-colour design software
  • Ribbonizes fiber to fit standard connectors

The machine can be configured to your product's requirements, including production speed and process optimization. Contact Iiro to discuss the options.

This is what it looks like in practice

Fiber routing in action

Coater in action

Parallel automated production: multiple products in one run

Dual layer production

From research to full-scale production

The same machine supports every stage of getting a design into production:

Research
Develop and test optimal circuit designs.

Small runs
Produce pilots or special, dedicated applications.

Scale to production
Move from pilot volumes to full production runs.

Two ways to get started

  • 1

    Etteplan supports your R&D

    • The machine stays at an Etteplan location.
    • We produce single products or small batches to your design.
    • Validate and optimize quickly, at low cost, before committing further.
  • 2

    Have your own machine

    • The machine runs at your production facility.
    • Use it for both R&D and production.
    • Customized to your needs.

Here's what the result can look like

Picture courtesy of SYLEX

Picture courtesy of SYLEX

Picture courtesy of SYLEX

Picture courtesy of SYLEX

Request a sample

Want to see what our fiber routing and coating machine can do in practice? We'll send you a sample, a fiber flex circuit we produced ourselves, so you can get a hands-on feel for the machine's capabilities and the quality of the end product. Fill out the form below.

Required fields are marked with an asterisk

FAQs on fiber routing and coating

You might find this interesting as well

Ask our expert a question

Iirotapio Aalto

Vice President, Etteplan Production Solutions and Country Manager, the Netherlands

Required fields are marked with an asterisk